Protection And Separating Walls

Protection And Separating Wall System For 7,8 mm Mesh Sheet Material

  • preassembled panels in standard grids: 500, 750, 1000, 1500
  • preassembled support legs
  • compatible to the standard program
  • panel thickness: 7.8 mm
  • doors and double doors with latch or shoot bolt system
  • slide doors with and without super structure
  • attachment of the frame elements to the support legs occurs via an adjustable holder and an angle with turn- and along attitude

Door kits 


Door Kit


Door Kit 1000

Double Door Kit

Sliding Door Kit, with


Sliding Door Kit, without






 Special profiles, accessories

Mesh Guarding
Profile 40
  Mesh Guarding
Profile 40 90°
  Mesh Guarding
Profile 40 180°
Protection Wall Lock   Clamping Foot 40x40   Metal Foot
Separating Wall System panel thickness: 4 mm
Internal Elements   Frame Element   Double Frame Element
  • panel thickness: 4 mm
  • preassembled frames in standard sizes with differing number of t-slots (3/5/6)
  • preassembled support legs
  • compatible to the standard program
  • lockable single doors and double doors
  • smooth, clean surfaces
  • various applications
Door element   Double Door Elements   Sliding Door Elements   Double Sliding Door Elements


Protection Wall Profile 40/4   Protection Wall Profile 40/4 8.6   Protection Wall Profile 40/4 semi   Protection Wall Profile 40/4 8.6 semi
Protection Wall Profile 40/4 180°   Protection Wall
Support Leg Profile 60x80
  Protection Wall
Support Leg Profile 60x80 5N
  Protection Wall
Support Leg Profile 80x80


Locking Mechanisms


Clamping Feet


Mounting Feet

Clamp Profiles, Blend Profiles and Frame Profiles

Standard Profiles (2 mm thru 8 mm)

From the extensive range of Silverline profiles most static requirements can be met.

Sheet materials are easily fixed using accessories from the catalog.



Blend Profiles (2 mm and 6 mm)

Blend profiles attach 2mm and 6mm sheet elements to standard profiles when pressed into the grooves.



Clamp Profiles

Clamp profiles are used for clamping sheet materials to standard profiles. In this connection an aluminium strip is being pressed on the sheet material via grub screws and uptights the sheet material in the profile frame.

They are manufactured for all three profile ranges (40, 30, 20) in three different designs.




The Frame Profile (up to 8,5 mm)

The protection wall panel is assembled from frame profiles.

The panel frame is made using the basic profile. The sheet element is laid into the frame and held in position by the panel profile. The left and right sides are fastened first and then the top and bottom sides.

The panel profiles comprises of a plastic and aluminium cover profile attached to the frame profile. The supplied compensating rubber is designed to compensate for the differences in thickness of the sheet elements.


Track Profiles For Vertical Lift Doors

An extensive range of vertical and horizontal sliding doors can be manufactured from the Paletti range of profiles and actuator accessories.

The following are a few examples showing how sliding doors are manufactured. The doors can be operated by electric motors, pneumatic cylinders or by counter balances and gas pressure dampers for ease of operation.